Aerosol Generator - Ultrasonic Disinfection

The copyright of this article belongs to Siansonic Technology.The production is prohibited without permission.

With the progress of society and the improvement of living standards, people pay increasing attention to the quality of their work and living environment. Coupled with the COVID-19 pandemic in recent years, people have also focused more on environmental disinfection. There are multiple ways of disinfecting the environment. One effective method is to use ultrasonic waves to disperse the disinfectant into droplets and distribute it to the area that needs to be disinfected so as to achieve the disinfection purpose.

ultrasonic disinfection scene

Figure 1. ultrasonic atomization disinfection scene

The NX series submicron aerosol generator, as an ultra-fine atomizer specially used for ultrasonic disinfection and sensor control, atomizes the liquid through high-frequency ultrasound. The special flow channel design can output droplets with an average particle size of only 0.5 microns. Droplets are also known as “dry fog”, because their particle size is very small and evaporates quickly when they come into contact with the surface of an object without causing accumulation or condensation. When ultrasonic disinfection is conducted in some spaces with precision instruments, it is necessary to consider whether the ultrasonic disinfection process will cause damage to the instrument, and the submicron “dry fog” will not wet the object surface. Thus, it will not affect the instrument during ultrasonic disinfection. At the same time, the aerosols formed by submicron atomized droplets have better suspensibility and dispersibility, and can fill the entire confined space more quickly, without leaving dead spots. Therefore, the NX series aerosol generator is particularly suitable for killing germs without dead spots in the environment in confined spaces. At present, ultrasonic disinfection and dry fog technology has been widely applied in the US, especially for spatial disinfection of environments such as hospitals, laboratories, and pharmaceutical companies.

Siansonic Technology has over three decades of experience in the field of ultrasonic disinfection and atomization, and owns various advanced solutions in the field of ultrasonic disinfection, especially air disinfection, surface disinfection, and water purification treatment.

ultrasonic atomization disinfection

Figure 2.ultrasonic atomization disinfection system

With high corrosion resistance and durability, Siansonic's ultrasonic disinfection products are compatible with various typical disinfectants. For example, the NX series submicron aerosol generator has built-in sensors and pumps, supports automatic rehydration, and is a highly corrosion-resistant ultrasonic disinfection atomization transducer, which can be compatible with all disinfectants, such as hydrogen peroxide, peracetic acid, hypochlorous acid, and chlorine dioxide. The NX series ultrasonic disinfection aerosol generator can be used alone or in combination to facilitate the development and construction of various kinds of disinfection equipment. A set of NX8000 submicron aerosol generators can fill 1 cubic meter of space in 60 seconds, and the ultrasonic disinfection equipment composed of 4 sets of NX8000 aerosol genera





+86 1081502288

+86 1081502689


+86 1081502688


1 Xing Guang 5th Street, Tongzhou District, Beijing China